for Apple TV

Make your own station IDs and bumpers

Five seconds, one card, one line of voice. You made it, so nobody else owns it, and it fills the dead seconds at the end of a break.

Published · Updated · By Ethercycle LLC

Station IDs are the cheapest part of a break library to make, and each one does two jobs. An ident tells you which channel you are on, and it fills the four seconds that no commercial fits. You need a laptop and one evening.

Real stations had to make them. Under U.S. rules, a broadcast station identifies itself "Hourly, as close to the hour as feasible, at a natural break in program offerings," and "Television and Class A television broadcast stations may make these announcements visually or aurally." Your channels need no license. They do need an ident, because a channel with no name on it is a playlist with ambitions.

Old idents and trademarks

Old idents are tempting and mostly off-limits. A station ID is a station's name and logo, and the U.S. Patent and Trademark Office describes a trademark as "A word, phrase, design, or a combination that identifies your goods or services." Most compilations of old IDs online state no rights at all. The break library guide covers that in detail.

An ident you designed, voiced, and scored yourself has none of those problems. You can also make it match your channels, which no old ident will.

A good 5-second ident

Five seconds is short. Plan it like this:

TimeWhat happens
0.0 to 0.5 sThe card arrives: a slide, a wipe, or a cut from black
0.5 to 1.2 sA sting: one note or a short chord
1.2 to 4.0 sThe voice line, over the card holding still
4.0 to 4.5 sSilence and the held card
4.5 to 5.0 sFade to black

One movement is enough. Two movements read as busy at this length. Hold the card still while the voice speaks, so the words and the picture land together.

Type

Use one typeface, at most two. Condensed bold capitals read from across a room and look right for most eras. Pick a font whose license allows this use. The SIL Open Font License site says fonts under that license can be used "in books, posters, artwork, logos, and on websites" and that "no acknowledgement is required."

Set the channel name large. Put a short line under it, smaller: "Stay tuned", "More after this", "Back in a moment". Leave a wide margin. Older TVs cut off the edges of the picture, so a card with a wide margin looks period-correct.

Color

Pick two colors and a neutral. A dark ground with one bright accent reads best on a TV. Some starting points by era, all generic:

Era feelGroundAccentNotes
Late 1970sDeep brown or burnt orangeCreamRounded type, soft edges
Mid 1980sNavy or blackHot pink, cyan, or chrome grayGrid lines, a horizon, hard shadows
Early 1990sTeal or purpleYellowSplashes, squiggles, slanted type
Around 2001IndigoLogo yellowGlossy bars, clean sans serif

Do not copy a real station's palette and layout together. Your own channel name in a period style is the goal.

Sound

A sting and a voice line are plenty.

  • Sting: one synth note, a three-note chime, or a single hit on a drum. Keep it under a second. You can generate a plain tone with ffmpeg, shown below, or play one on any keyboard and record it.
  • Voice: record on a phone in a quiet room with soft furnishings. Stand a hand's width from the microphone. Read the line five times and keep the best one. Lower your voice slightly and slow down. Station voices were never in a hurry.

Good lines are short: "You're watching Midnight Movie." "This is The Mix." "Saturday Morning. We'll be right back." "Deep Cuts. You haven't seen this one."

Make the card

Draw the card in any free image editor that exports PNG with transparency.

  1. Make a canvas of 1920 x 1080 pixels.
  2. Leave the background transparent. The video background comes from the command below.
  3. Set the channel name and the short line. Keep everything inside the middle 80% of the canvas.
  4. Export as card.png.

For an older look, make a 4:3 canvas of 1440 x 1080 instead. The Apple TV shows a 4:3 file with bars at the sides, the way a 1985 picture would sit on a wide set.

Animate it with one command

This command takes the card, a solid background, a short sting, and your voice clip, and returns a finished 5-second MP4. The card slides in from the left over half a second. The picture fades in, holds, and fades out at the end. Leading silence is cut from the voice clip, the voice starts at 1.2 seconds, and the whole mix is leveled to -24 loudness with peaks under -2, the target the ATSC A/85 recommended practice sets for content delivery.

ffmpeg \
  -f lavfi -i "color=c=0x170D55:s=1920x1080:r=30000/1001:d=5" \
  -loop 1 -framerate 30000/1001 -t 5 -i card.png \
  -i voice.wav \
  -f lavfi -i "sine=frequency=880:duration=0.35" \
  -filter_complex "\
[1:v]format=rgba[card];\
[0:v][card]overlay=x='min(0,-W+W*t/0.5)':y=0,fade=t=in:st=0:d=0.2,fade=t=out:st=4.5:d=0.5,format=yuv420p[v];\
[3:a]afade=t=out:st=0.2:d=0.15,adelay=500|500[sting];\
[2:a]silenceremove=start_periods=1:start_threshold=-45dB,adelay=1200|1200[vo];\
[sting][vo]amix=inputs=2:normalize=0,apad,atrim=0:5,loudnorm=I=-24:TP=-2:LRA=7,aresample=48000[a]" \
  -map "[v]" -map "[a]" -t 5 \
  -c:v libx264 -crf 16 -preset slow -pix_fmt yuv420p \
  -c:a aac -b:a 192k -ac 2 \
  -metadata title="Midnight Movie ident" -metadata date=1996 \
  ident_midnight-movie_1996.mp4

What to change:

  • 0x170D55 is the background color in hex.
  • -W+W*t/0.5 is the slide. Change 0.5 to make it faster or slower. Replace the whole overlay=... with overlay=0:0 for a plain cut.
  • frequency=880 is the sting's pitch. 440 is an octave lower.
  • adelay=1200|1200 starts the voice at 1.2 seconds.
  • d=5, -t 5, atrim=0:5, and st=4.5 set the length. Change all four together for a longer ident.

Any phone recording works as voice.wav. ffmpeg reads most audio formats, so a voice memo file works in place of WAV.

A still version

The simplest bumper of all is a card and a voice, no motion:

ffmpeg -loop 1 -framerate 30000/1001 -t 5 -i card_full.png -i voice.wav \
  -filter_complex "[1:a]apad,atrim=0:5,loudnorm=I=-24:TP=-2:LRA=7,aresample=48000[a]" \
  -map 0:v -map "[a]" -t 5 -c:v libx264 -crf 16 -pix_fmt yuv420p \
  -c:a aac -b:a 192k -ac 2 bumper_still.mp4

Here card_full.png has its own background drawn in, with no transparency.

Export settings

SettingValueWhy
ContainerMP4Plays directly on Apple TV
VideoH.264, 8-bit, yuv420pPlays directly; no work for your server
Size1920 x 1080, or 1440 x 1080 for 4:3Sharp on a modern TV
Frame rate29.97 (30000/1001)Matches most vintage material
AudioAAC, 48 kHz, stereoPlays directly
Loudness-24 integrated, true peak under -2Same level as leveled commercials
Length5 s, plus a few at 3, 10, and 15 sShort items help a break end exactly

SpiteTV plays MP4, MOV, and M4V files with H.264 8-bit video and AAC audio directly on the Apple TV. Some other formats also play directly. The rest go through your Plex server, which copies what fits and converts the rest. See direct play.

How SpiteTV uses your idents

Commercial breaks are part of Premium. With breaks on, programs start on the quarter hour and spots from your break library fill the gap. An ident is a spot like any other. Tag it in Plex with the genre Bumper, a year, and a rating.

Short idents are most useful at the end of a break. For the last 120 seconds, SpiteTV packs the best-fitting set from up to 16 spots. A library of 30-second commercials alone leaves odd gaps, and a card covers them. A handful of 3, 5, and 10-second idents lets more breaks end on your own ident instead. When a hold of under 5 seconds remains, SpiteTV shows its own channel ident card; at 5 seconds or more it shows a "coming up next" card with the next title.

The kind genres, Commercial, Promo, PSA, and Bumper, are labels for you. SpiteTV does not choose by them. What steers a spot is its category, its year, its rating, and any holiday tag.

Steer an ident toward its channel

SpiteTV picks spots by tag, not by channel name. An ident that says "Midnight Movie" can play on any channel whose rules allow it. You can still steer it, using the same rules that place commercials.

GoalTag it like thisWhat happens
Late night onlyRating TV-MASpots rated TV-MA, R, NC-17, or X play only on the After Dark package
With the 80s channelsYear 1980 to 1989Decade channels such as 80s Mix play only spots from their years when the library has any; breaks elsewhere prefer spots within 2, then 5 years of the program
On kids channelsRating G or TV-G, category Toys & GamesKids and Cartoons channels play only kid-rated spots and fill about 70% of each break with Toys & Games, Video Games, and Kids Food first
Only in OctoberGenre Holiday: HalloweenHoliday channels fill up to half a break with it; other channels play it only in October
Only in the Christmas seasonGenre Holiday: ChristmasChristmas channels fill up to half a break with it; other channels play it from November 1 to December 31
Almost everywhereRating G, no categoryAllowed on every channel, including Kids; decade channels still prefer spots from their own years

Rating a harmless bumper TV-MA is fine. Here the rating works as a placement tag.

Ideas for the lineup

SpiteTV's channel names lean on the era. Some ident ideas that fit them:

  • The Mix (2): a shuffled stack of cards, each a different color, landing one on top of the next. Voice: "This is The Mix."
  • Eight O'Clock (3): a plain clock face that ticks to the hour. Voice: "It's Eight O'Clock. Somewhere." Year it to your drama shows' era.
  • Laugh Track (4): a single canned laugh as the sting. Voice: "Laugh Track. You'll laugh. We checked."
  • Fresh Tape (17): a cassette label being written on. Voice: "Fresh Tape. New to the shelf."
  • Deep Cuts (18): a needle dropping on a record, then a cut to black. Voice: "Deep Cuts. You haven't seen this one."
  • Midnight Movie (24): a crescent moon over a city skyline. Voice: "You're watching Midnight Movie." Rate it TV-14 so it stays off Kids channels.
  • Dusty Trail (32): wind noise as the sting, the name in wood-type letters.
  • Saturday Morning (50): a cereal-box color scheme and a slide-whistle sting. Rate it G and tag it Toys & Games so Kids channels pick it first.
  • Night Terrors (163): a flicker of static and a single low note. Rate it TV-MA to keep it on After Dark.

Channel numbers can move. With Premium you can reorder channels, and a moved channel takes a new number. If you put a number on an ident, keep the standard order, or leave the number off and let the name carry it.

Make a set in one evening

  1. Pick five channels you watch most.
  2. Draw one card each, in one style, with one font.
  3. Record ten voice lines in one sitting. Keep the five best.
  4. Run the command five times, once per card.
  5. Copy the files into your break library folder and let Plex scan.
  6. In Plex, tag each one: Bumper, a year, a rating, and a holiday if it has one.
  7. In SpiteTV, open Settings > Channels, set Break Library to your library, and turn on Commercial Breaks. Wait for a break.

Then make a holiday set before each season. Seasonal channels arrive on their own dates; see the seasonal calendar.

Sources

  1. https://www.ecfr.gov/current/title-47/chapter-I/subchapter-C/part-73/subpart-H/section-73.1201 Read 2026-11-14
  2. https://openfontlicense.org/ Read 2026-11-14
  3. https://ffmpeg.org/ffmpeg-filters.html Read 2026-11-14
  4. https://www.atsc.org/wp-content/uploads/2025/06/A85-2013-with-Corrigendum-No-1.pdf Read 2026-11-14
  5. https://www.uspto.gov/trademarks/basics/trademark-patent-copyright Read 2026-11-14

Asked and answered

Why make idents instead of using old ones?

Old station IDs carry the station's or network's name and logo, which are trademarks, and most uploads state no rights. An ident you designed, voiced, and scored yourself is yours.

How long should a station ID be?

Five seconds is a good default. Make a few at 3, 10, and 15 seconds too. Breaks end with an exact fill from short items, so a mix of lengths means fewer breaks end on a card.

Can I make an ident play only on one channel?

Not by name. SpiteTV picks spots by their tags. You can steer one: a TV-MA rating keeps it to the After Dark package, a year keeps it with a decade channel's spots, and a holiday tag keeps it to that season.

Should I put a channel number on my ident?

Only if you keep the standard channel order. With Premium you can reorder channels, and a moved channel takes a new number, so a number baked into a video can go out of date.

What file format should I export?

MP4 with H.264 8-bit video and AAC audio. SpiteTV plays that on Apple TV directly, with no conversion on your server.

Keep reading

SpiteTV for Apple TV is in beta. Join the beta.

Menu

Join the beta